first time doing timing.

mavisky · **Posted:** Wed Aug 19, 2009 9:36 am

I may be able to make it over to take a look at it sometime next week.

aclay · **Posted:** Wed Aug 19, 2009 9:39 am

If you could I would appreciate it. I called Fome but didn't get answer or maybe I dial the wrong number or something I don't know the guy came over and pissed me off.

Polish · **Posted:** Wed Aug 19, 2009 9:41 am


	aclay wrote: We never took off the BS belt off but it is hooked to the crankshaft so maybe we did worst when we thoguht we were doing good.

It is probably out of phase, causing your shaking.

aclay · **Posted:** Wed Aug 19, 2009 9:45 am

Well I will look at it more next week. Mavis let me know.

Fome · **Posted:** Wed Aug 19, 2009 10:26 am

never got a all from a number not stored in my phone sorry bro

aclay · **Posted:** Wed Aug 19, 2009 11:04 am

Thats cool not your fault I might missed dialed.

aclay · **Posted:** Wed Aug 19, 2009 2:05 pm

I might be able to dig deeper into my pocket if someone could come over here and time this car today. To rent a car is expensive for me since I am under 25. Help Help. Please. I have to be in ohio tom after noon. I even got the new timing cover today.

aclay · **Posted:** Wed Aug 19, 2009 2:28 pm

You can Text or call me at 260 705 2653 or come over 822 forest ave Fort wayne In 46805 block off of parnell and 2 block off state

aclay · **Posted:** Mon Aug 24, 2009 9:55 am

Well I think I found out why I had shaking when I started it up. Right before I left thrusday I went out and put it back at TDC and guess what it was off 4 teeth on the cams. I figured out I might not of let the tensioner sit long enough before starting it. Going to try it again later today and see this time i will let the tensioner sit for a little.

Polish · **Posted:** Mon Aug 24, 2009 10:07 am

4 teeth? That may be enough that the valves and pistons got to meet. Might want to do a compression test and see if any got bent.

aclay · **Posted:** Mon Aug 24, 2009 10:12 am

I have no idea how to do that. The exhaust cam was the one that was off as far as I know. As soon as i took the belt off it pop back in place.

aclay · **Posted:** Mon Aug 24, 2009 10:39 pm

Well got it running but don't think it is running right. Any one got something to do a compression test and could run by and do it for me if not I will just wait till october to see because I am broke till then

Fome · **Posted:** Tue Aug 25, 2009 12:45 am

im gonna be testing compression on mine tomarrow and then you can use it

ill txt you this time

aclay · **Posted:** Tue Aug 25, 2009 7:46 am

That would be cool. I have school at 1 to like 4 or 5 after that I am just packing.

aclay · **Posted:** Sat Aug 29, 2009 4:43 pm

Thanks Andrew for coming over and checking the compression. I think i am going to change the belt and tenssioner. So what belt and tensioner and best place to get it.

first time doing timing.

Who is online